BACK
This blade looks great as an external shutter installation in either the fully open panel configuration or in the closed position. Remember all of our shutters can be configured to operate groups of blades (as an option) to suit your requirement. This beautiful Canadian timber is kiln dried and hand selected vertical grain, clear of any blemishes, knots or shells. We do not stain or colour the timbers, we choose all woods grain and colour matched. We do not apply and Lacquers, varnishes or paints. This is because all of these surface coatings will deteriorate over a short amount of time. We impress our shetter into a bath of Danish Oil and then hand rub the surfaces.
Available in Aluminium & Cedar.
Specification
This blade looks great in either the fully open panel configuration or in the closed position. The unwritten rule of thumb seems to be ..."the smaller the opening then the smaller the blade". Dimensions work well this way but of course it is a personal preference that matters. Have a look at our vast Gallery to get some ideas.
Remember all of our shutters can be configured to operate groups of blades (as an option) to suit your requirement. (Clearview has some limits compared to the LouvreMate system offered in our Aluma range)
| Trade Mark | Mondo Design |
|---|---|
| Material | Western Red Cedar |
| Blade Profile | Elliptical Contour Shape |
| Design | Horizontally Placed Elliptical Blades operating Cogently via clearview side mounted aluminium tolt bar. |
| Blade Operating Range | 350º |
| Projection | 20 mm |
| Blade size | 68mm wide 14 mm thick |
| Total Mass Kg/ m² | 7.5Kg |
| Suitability | Interior |
| Blade Grouping | Customizable – Equal if not specified |
| Open vista | 57mm Clear Opening |
| Max. panel width | 800mm |
| Max. Panel height | 2400mm (Mid Rail required depending on design) |
| Max. Vertical Mullion Centres | Blade Length |
| Max. operable blade configuration | 700mm |
| Mid rail | Not required < 1800mm |
| Stiles | 50mm Wide |
| Frame thickness | 28mm |
| Top rails | 70 to 107 mm |
| Bottom rails | 70 to 107mm |
| Finishes | Raw or Danish Oiled |
| Blade Configurations | Horizontal |
| Panel Configurations | Inside: Reveal Mount Hinged Outside: Face Mount Hinged Sliding Removable Locking Pins Bi-Fold Cafe (split panel) |
| Options | Pre-hinged and pre framed (ready) Supply only (self install) Supply and installation quoted |
| Hardware | Locks, Hinges, Flush bolts, draft excluder, touch-up Lacquer |
Configuratoin
Configuration details coming soon...
Details currently not available
| Trade Mark | Classic Ellipti Design |
|---|---|
| Material | Aluminium |
| Blade Profile | Elliptical Contour Shape |
| Design | Horizontally Placed Elliptical Blades operating Cogently via Clearview side mounted Aluminium tilt bar system |
| ********* | ********* |
| ********* | ********* |
| ********* | ********* |
| ********* | ********* |
| ********* | ********* |
| ********* | ********* |
Compare Blade Projection
