Our new 200mm Marquis blade
Suitable for external application
| Trade Mark | Aero Design |
|---|---|
| Material | Aluminium |
| Blade Profile | Elliptical Contour Shape |
| Design | Horizontally Placed Elliptical Blades operating Cogently via patented ‘Louvre Mover’ fully integrated operating system |
| Blade Operating Range | 350º |
| Projection | 75 mm |
| Blade size | 200mm wide |
| Total Mass Kg/ m² | 15Kg |
| Suitability | Security / High Impact / Exterior |
| Blade Grouping | Customizable – Equal if not specified |
| Open vista | 161mm Clear Opening |
| Pitch of Blade(Centres) | 188mm |
| Section | Rail 60mm x 60mm Stile 60mm x 60mm |
| Max. panel width (Hinged/Slider) | 1000/1200mm |
| Max. Panel height | Recommended 2400mm Custom designed to 6.500 metres(Mid Rail required, wind fin designed to suit) |
| Max. Vertical Mullion Centres | Blade Length dependant |
| Max. operable blade configuration | 900 / 1100mm |
| Mid rail | Not required if less than 1800mm subject to width criteria |
| Stiles | 60mm Wide |
| Frame thickness | 60mm |
| Top rails | 60mm x 60mm |
| Bottom rails | 60mm x 60mm |
| Finishes | Anondized or Select from Powdercoat range |
| Blade Configurations | Horizontal / Vertical |
| Panel Configurations | Inside: Reveal Mount Hinged Outside: Face Mount Hinged Sliding Bi-Fold Removable Drop Fixed |
| Options | Pre-hinged and framed Architrave or Z Mould (ready to install) Supply only panel only (self install) Supply and installation quoted |
| Hardware | Key Locks, Star Pin Drop Bolts, Hinges, Flush bolts, draft excluder, touch-up paint |